Canning Line from Various

No.: 21-011-01 | Category: Filling Lines

SECONDHAND CANNING LINE

Line Capacity: 
30.000 cans / h for 0.33l
Filling temperature: 18°C
Can:  0,33l Standard Can / 0,25l Can Slim / 0,33l Can Sleek
Packaging: 5 x 6 cans on tray, shrinked in foil
Empty Can Pallets: 1.420 x 1.120 mm (Max. height of pallet with empty cans: 2.800 mm)
Full Can Pallets: Pallet size: 1.200 x 1.000 mm

consisting of:

POS. 1
EMPTY CAN DEPALLETIZER
(#1343 – secondhand, overhauled)


make: SASIB               
type: Sweep Off AZ
year: 2000
capacity: 40.000 – 50.000 cph
PLC: Siemens S7

Suitable for handling of the following pallet sizes:
Pallet size: 1.420 x 1.120 mm
Max. height of pallet with empty cans: 2.800 mm

Including:

  • Platforms / walk ways
  • Safety fences
     

POS. 2             
EMPTY CAN CONVEYORS (new)

leading from Empty Can Depalletizer to Can Rinser

Including:

  • All wear strips
  • All can guide rails
  • All drives (make SEW), all drives variable speeds (Movigear)
  • All bearings
  • All drive sprockets
  • All return idlers
  • Complete plastic slat chain for the total system to be delivered with the can conveyors

General:

  • to be built according to layout

Line Lubrication:

  • Dry lubrication

Including:

2 x Can Turner (new)
For turning the cans prior and after coding station

Including:

Can Coder (new)

make: Domino
type: Ax250i Inkjet

POS. 3
Single VACUUM BRIDGE (new)

make: H.F. Meyer
year: new on order

For empty cans size:   0,25l Can Slim, Dia 53 mm, h 134 mm / 0,33l Can Sleek, Dia 58 mm, h 145 mm

Capacity: Type 1-2: 30.000 cans / h

Length: approx. 3.500 mm
Conveying Height: approx. 1.200 mm
Conveying medium: straight-going perforated plastic hinged chain, on plastic slide guides
Number of chains: 1 pc.
Drive:  head drive

1 pc. Gear drive with fixed revolutions, suitable for FT-operation, 400 V, 50 Hz, IP 54
Vacuum generation: 1 pc. Fan, aluminium cast housing, suitable for FT-operation, 400 V, 50 Hz, IP 54
Air house from fan: approx. 140 mm at outer-Ø
Frame: sheet metal profile design
Foot: square pipe design with screw-feet, height adjustment +/- 50 mm
Side guides:  profile design
Accessories:  manual central height adjustment (115 to 168 mm), by crank
Paint finish: gear drive in manufacturer`s paint finish
Noise level: > 85 dB (A) (see also available additional equipment)
Additional equipment:   Additional noise protection
Repair switch
1 pc. Strut for attaching a coding head holder
 

POS. 4             
PREMIXING UNIT (secondhand, overhauled)


make: Falterbaum
type: FAMIX 15000 / 2 components
year: 2001
PLC: S7
capacity: 15.000 l / h

  • incl. mechanical and electrical overhaul
  • incl. plate heat exchanger, pumps and PLC for cooling
  • incl. testing in our workshop


POS. 5             
CAN RINSER (new) - vertical decline version

make: H.F. Meyer
year: new on order
can sizes: 0,25l Can Slim, Dia 53 mm, h 134 mm / 0,33l Can Sleek, Dia 58 mm, h 145 mm
capacity at filler: 30.000 cph

Rinsing time:
Can dm 66mm              appr. 1,5 sec at capacity of 30.000 cph

Dripping time (after rinsing):
Can dm 66mm              appr. 3,8 sec at capacity of 30.000 cph

HYJET Water Rinser
finished in stainless steel

Single-track for

Can size: 0,33l Can Sleek, Dia 58 mm, h 145 mm,
Rinser housing: stainless steel with transparent flap box
Spray tube: stainless steel
Connection: 1 pc water connection consisting of:

  • manual stop valve DN15
  • solenoid valve 24 V/DC
  • pressure switch
  • backflush filter with manometer       

Foot:   spare pipe design with screw-feet, height adjustment +/- 50mm
Infeed height: 3.500mm
Outlet height: 1.250mm
Rinser length: 3.000mm
Slope of Rinser: 30°
Twister:

1 pc infeed 135°
1 pc outlet 225° 
1 pc in height from appr. 88 to 188mm
and width from dm 53mm to dm 66mm
manually centrally adjustable

Design:                       
chutes and twister with 6 stainless steel round profiles,
5 of them with plastic cover, flared flange guide free

Water
Consumption: 19,9l/min at 3 bar

Conversion set for infeed and discharge Rinser (twister)
(with fast changing system)

Can size: 0,25l Can Slim, Dia 53 mm, h 134 mm
Design: twister with 6 stainless steel round profiles


POS. 6             
CAN FILLER (secondhand, overhauled)


make: O+H Hansacan / KHS
type: Hansacan Typ: D 40-123
year: 1996
capacity: 30.000 cans / h for 0.33l
PLC: S7

  • including can handling parts for 0,25l Can Slim, Dia 53 mm, h 134 mm and for 0,33l Can Sleek, Dia 58 mm, h 145 mm

The following overhauls will be carried out on the filler:

  • Overhaul of the central distributor
  • Overhaul of the main drive system
  • Overhaul of central toothed ring and main bearing
  • Overhaul of the tooth belt disc
  • Overhaul of the automatic lubrication system
  • Overhaul of all filling valves
  • Overhaul of central product infeed
  • Overhaul of all pneumatic valves
  • Overhaul of main drive (gearbox), infeed worm (gear box)

including:

Seamer (secondhand, completely overhauled)

make: Ferrum
type: F506
year: 1996
PLC: including conversion from Siemens S5 to S7

  • including can handling parts for 0,25l Can Slim, Dia 53 mm, h 134 mm and for 0,33l Can Sleek, Dia 58 mm, h 145 mm

including

Cap Supply

type: Semi-automatic

POS. 7             
FILL HEIGHT CONTROL (new)


make:               Heuft
year:                 NEW

POS. 8             
FULL CAN CONVEYORS (new)

leading from seamer discharge to infeed of wraparound packer         

including:

  • All wear strips
  • All can guide rails
  • All drives (make SEW), all drives variable speeds (Movigear)
  • All bearings
  • All drive sprockets
  • All return idlers
  • Complete plastic slat chain for the total system to be delivered with the can conveyors


General:

  • The complete conveyors to be built according to layout
     

Line Lubrication:

  • Dry lubrication
     

POS. 9             
AIR CAN DRYER (secondhand, completely overhauled)

make: ACI Air Control
year: 2006

POS. 10            
TRAYSHRINKPACKER

for handling of 5 x 6 = 30 x 250 ml or 330 ml cans on tray, shrinked in foil

make: SMI
type: LSK 30 T Ergon
capacity: 25 packs / min.

POS. 11            
PACK CONVEYORS (new)

leading from Traypacker to Palletizer

Including:

  • All wear strips
  • All can guide rails
  • All drives (make SEW), all drives variable speeds (Movigear)
  • All bearings
  • All drive sprockets
  • All return idlers
  • Friction rollers

General:

  • The complete packs conveyors to be built according to “example layout”
     

POS. 12           
Electrical Control System (NEW)

For

Empty Can Conveyor (Pos. 2)
Full Can Conveyor (Pos. 4)
Air Can Dryer (Pos. 5)
Pack Conveyor (Pos. 6)

  • New electrical panel with Siemens S7 PLC
  • All drives variable speed, make SEW
  • All switch gears such as proximity switches, photo barriers etc. new
  • New operator panel (Touch)


POS. 13            
PALLETIZER
(second hand overhauled)

Including tray turning station

make: Kettner
type: Pressant Universal       
year: completely overhauled 2019 (on order) 
capacity: 150 layers/h
PLC: Siemens S7

suitable for:     

  • Trays with and without film
  • Euro pallets

including:

  • tray turning station
  • pallet conveyors according to attached layout
  • pallet magazine
  • safety fences

type:

  • 1-lane lower infeed with roller conveyor
  • 6 gap dividers
  • grouping station with row pusher
  • loading plate with corrugated sheet metal

electrics:

  • voltage 400V, frequency 50Hz
  • controls Siemens S7-300          

Complete mechanical overhaul:

  • All drives and gear boxes will be delivered new
  • All wear strips to be replaced
  • All bearings to be checked and changed if necessary
  • All wear and tear parts to be checked and changed if necessary

General:

  • The complete machine to be cleaned
  • Machine to be painted with a primer, afterwards to be painted with the final paint according to your requirements


POS. 14            
PALLET WRAPPER (#1411)
(second hand overhauled)

make: Atlanta
type: Omega
year: 2011
capacity: 120 Pal. / h
PLC: Siemens S7